northenergylife.blogg.se - Apple iigs emulator for mac os x

#Apple iigs emulator for mac os x install
#Apple iigs emulator for mac os x serial
#Apple iigs emulator for mac os x update
#Apple iigs emulator for mac os x manual
#Apple iigs emulator for mac os x software

The bridge should work in both a routerless and router-filled network, and future revisions will remove this limitation. The bridge requires an AppleTalk router on the network.Other platforms should be straightforward, but I do not have a suitable build environment. The bridge supports Windows using Visual Studio, Cygwin, and Linux (x86 and Raspberry Pi).Still, emulated network speed should be close to the 230.4kbps speed of a real LocalTalk network. The SCC baud rate is incorrect because the GSport does not emulate line coding.

#Apple iigs emulator for mac os x software

Other ROM revisions and system software may not work. Booting from a local disk or from the network works.

AppleTalk bridging has been tested with System 6.0.1 and System 5.0.2 on ROM03.

Instead, use a wired Ethernet connection.

A wireless network may not work because many wireless adapters drop EtherTalk packets.

Instead, run a compatible network server, such as A2SERVER, Netatalk 2.x, or AppleShare. Neither are compatible with file or print sharing functions in modern computers.

The IIgs hardware and GSport only support AppleTalk using LocalTalk.

Refer to Apple's documentation included with GS/OS System 5 and 6 for further directions. Your GS is now connected to the AppleTalk network. Under the "Ethernet Card Configuration" menu, change "Use Interface Number" to select the "MS LoopBack Driver".įinally, party like it is 1989. Under the "Advanced" sub-section, make sure "Promiscuous Mode" is "Allow All". Change the "Attached to" option to "Bridged Adapter" and "Name" to "Microsoft Loopback Adapter".

In the VirtualBox Manager, open "Settings" for the A2SERVER virtual machine.

#Apple iigs emulator for mac os x install

Install the "Microsoft Loopback Adapter" following directions from Microsoft.

#Apple iigs emulator for mac os x manual

The A2SERVER project provides a pre-configured virtual machine as well as manual installation directions.

Configure A2SERVER in a VirtualBox virtual machine.

You may run GSport and netatalk (or A2SERVER) on the same machine: Change "Use Interface Number" to select the network where you have attached your AppleShare server or A2SERVER.

Select the "Ethernet Card Configuration" menu option.

Start GSport and press F4 to access the configuration menu. Second, you need GSport 0.3 or later with ROM03 running on a Windows or Linux (x86 or Raspberry Pi) machine. File and print sharing functions built-in to modern computers are not directly compatible. You may run A2SERVER in a VirtualBox virtual machine, on an existing Linux server, or on a Raspberry Pi. For simplicity, I recommend Ivan Drucker's A2SERVER ( ), which is a pre-configured and easy-to-use package with "netatalk" and other useful tools. A classic Mac or "netatalk" server could provide this function. The GSport emulation converts LocalTalk to EtherTalk but does not support AppleTalk over IP.įirst, you need an AppleShare-compatible server. The IIgs only supports AppleTalk using LocalTalk.

The "Internet modernized" AppleTalk (AppleTalk IP) replaces many key services of the older AppleTalk and is incompatible with the previous incarnation of AppleTalk. As the Internet became popular, Apple revised their approach to networking to use TCP/IP for the network and transport layers. TokenTalk refers to AppleTalk using the TokenRing link and physical layers. EtherTalk refers to AppleTalk using the Ethernet link and physical layers. LocalTalk refers to AppleTalk using the original MiniDIN physical and link layers. Rather, AppleTalk became the overall term for Apple's approach to networking. The term AppleTalk no longer implied MiniDIN cabling. As other physical layers such as Ethernet and TokenTalk became more affordable, Apple defined new terms. You can download the latest Apple II software and immediately run it.īeware that Apple changed the meaning of the word "AppleTalk." Originally, AppleTalk implied a physical layer using 3-pin MiniDIN shielded cables connected in a bus topology.

#Apple iigs emulator for mac os x update

Rather, you can update the file once on your file server, and all of your emulated and real machines have the new file. You don't need to think much about version control. You can develop new software with an emulator and quickly test on real hardware.

#Apple iigs emulator for mac os x serial

Now, you can just "drag and drop" files between your machines without thinking about disk images, FTP, or serial cables. As of March 2014, GSport is the first modern emulator with support for AppleTalk. AppleTalk is a low-cost, easy-to-maintain network technology that enables network booting, file sharing, and printer sharing between your Apple IIgs, Workstation Card equipped Apple IIe, and classic Macintosh machines. The Apple IIgs shipped with a fantastic but often overlooked feature - AppleTalk networking.